We upgrade our design to use 8 Giga Bytes of DDR4 using 2 Micron chip MT40A4G8NEA-062E:F. I used the SDK 09.02 and sysconfig tools online. Our DDR4 chip are wired with 1 chip select. 1 - Do I need to ...

The open-loop gain in the simulation result (59.9V/mV) is smaller than the minimum value (70V/mV) in the datasheet. Does this mean that the gain in the SPICE model is smaller than the gain in the ...

We have two TI chips: LMR38020FDDAR and TPS62826ADMQ connected together on 2 of our designs in the following way: So, the 5V coming from the LMR38020FDDAR is connected into the Vin of the TPS62826ADMQ ...

Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...

I have some questions about the manual. 1.Which register does this reset refer to?FRAME_CNT_THRESHOLD(46H) or FRAME_CNTx(45H)? 2.Is the error counter mentioned in the ...

Reg63 ”DAC Channel Volume Control's Soft-Step control”...Soft-Stepping is 1 step per 1 or 2 DAC Word Clock I would like to check whether there is any pop noise when switching from maximum volume to ...

We are using TCAN1145-Q1 to judge it is wake up frame from the network or not by CANINT register bit. While we found when there are other nodes receiving WUF, this TCAN1145 node cannot assert register ...

We use gmake tool to build our AM62Ax project in windows operation system, sometimes the compiler report error log as the screenshot show,but if we try to rebuild the ...

I'm using the ADC128S102 EVM and I did some measurements I want to save to a log file. I the GUI there is such option but I cant find the location the Log file is generated to. Please help here.

I met the similar problem when using ads1274EVM-PDK, And of course, the USB device was enumenated under NI-VISA USB Devices: My PC is Windows 10 64 bit. In C:\Program Files (x86)\ADCPro\drivers ...

I modified the configuration of a customer board based on the AM62x-evm, and the image and sdk can be successfully compiled through the command. $ MACHINE=am62xx-customer bitbake tisdk-customer-image ...